Introduction; Starting Setup; Using Setup - Pixelink PPC15-CX Instruction Manual

5.1 Introduction

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.

5.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
If the message disappears before the D
again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in.
Key
Up arrow
Down arrow
Left arrow
Right arrow
Esc key
Page Up key
Page Dn key
Page 70
1. Press the D key as soon as the system is turned on or
ELETE
2. Press the D key when the "Press Del to enter SETUP"
ELETE
message appears on the screen.
Move to previous item
Move to next item
Move to the item on the left hand side
Move to the item on the right hand side
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
PPCxx-CX Series Flat Panel PC
0.
key is pressed, restart the computer and try
ELETE
to select, use the PageUp and
NTER
Function
to quit. Navigation
SC