Restore On Ac Power Loss [Power Off]; Resume On Lan/Ring [Disabled]; Resume On Pme# [Disabled] - Pixelink PPC15-CX Instruction Manual

PPCxx-CX Series Flat Panel PC
On/Off
Suspend

Restore on AC Power Loss [Power Off]

Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.
Power Off
Power On
Last State

Resume on LAN/Ring [Disabled]

Use the Resume on LAN/Ring BIOS option to enable activity on the RI (ring in) modem
line to rouse the system from a suspend or standby state. That is, the system will be
roused by an incoming call on a modem.
Disabled
Enabled

Resume on PME# [Disabled]

Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Disabled
When the power button is pressed the system is either
D
EFAULT
turned on or off
When the power button is pressed the system goes into
suspend mode
The system remains turned off
D
EFAULT
The system turns on
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Wake event not generated by an incoming call
D
EFAULT
Wake event generated by an incoming call
Wake event not generated by PCI PME controller
D
EFAULT
activity
Page 87