Terminal Type; Vt-Utf8 Combo Key Support; Serial Port Number [Com1]; Base Address, Irq [3F8H,4] - Pixelink PPC15-CX Instruction Manual

Serial Port Number [COM1]

Use the Serial Port Number option to select the serial port used for remote access.
COM1
COM2
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration
menu.

Base Address, IRQ [3F8h,4]

The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.

Serial Port Mode [115200 8,n,1]

Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
115200 8,n,1 D
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1
Page 90
These configuration options are discussed below.
System is remotely accessed through COM1
D
EFAULT
System is remotely accessed through COM2
EFAULT
PPCxx-CX Series Flat Panel PC

Terminal Type

VT-UTF8 Combo Key Support