At Power Mode; Atx Power Mode; Figure 3-10: At/Atx Switch Location - Pixelink PPC15-CX Instruction Manual

PPCxx-CX Series Flat Panel PC

Figure 3-10: AT/ATX Switch Location

Adjust the AT/ATX switch.
Step 3:

3.7.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The PPC-CX panel PC turns on automatically when the power is connected.
The AT mode benefits a production line to control multiple panel PCs from a central
management center and other applications including:
ATM
Self-service kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow

3.7.2 ATX Power Mode

With the ATX mode selected, the PPC-CX panel PC goes in a standby mode when it is
turned off. The panel PC can be easily turned on via network or a power switch in standby
mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
Security surveillance
Point-of-Sale (POS)
Advertising terminal
Step 0:
Page 51