Pixelink PPC15-CX Instruction Manual page 6

HANDLING PRECAUTIONS
1. Do not drop the PPC against a hard surface. Doing so may damage the
display.
2. Do not strike or exert excessive force onto the touch panel.
3. Touching the touch panel using a sharp object may damage the LCD panel.
4. Avoid harsh environments such as exposure to direct sunlight, dust, or
chemical vapors.
5. The PPC is passively cooled. In no circumstances should the PPC operate
with the ventilation openings obstructed or covered. The ambient temperature
of the installation site should be observed and controlled to avoid overheating
the PPC.
6. Condensation might form inside the PPC chassis if exposed to sudden
changes in temperature. Allow the PC to come to room temperature before
powering on.
7. Carefully route the power cord so that people cannot step on it. Do not place
anything over the power cord.
8. If the equipment should be left unused for an extended period of time,
disconnect it from the power source to avoid damage by transient
over-voltage.
9. If any of the following situations arises, get the equipment checked by service
personnel:
o
o
o
o
o
o
WARNING!
Any changes or modifications made to the equipment that are not
expressly approved by the relevant standards could void the warranty
Page vi
0.
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work properly, or the user cannot get it to work
according to the user manual.
The equipment has been dropped and damaged.
The equipment shows obvious signs of breakage.
PPCxx-CX Series Flat Panel PC