Mounting The System; Wall Mounting - Pixelink PPC15-CX Instruction Manual

3.8 Mounting the System

WARNING!
When mounting the PPC onto an arm, onto the wall or onto a panel, it is
better to have more than one person to help with the installation to make
sure the panel PC does not fall down and get damaged.
The four methods of mounting the PPC are listed below.
The four mounting methods are described below.

3.8.1 Wall Mounting

To mount the PPC onto the wall, please follow the steps below.
Select the location on the wall for the wall-mounting bracket.
Step 1:
Carefully mark the locations of the four brackets screw holes on the wall.
Step 2:
Drill four pilot holes at the marked locations on the wall for the bracket retention
Step 3:
screws.
Align the wall-mounting bracket screw holes with the pilot holes.
Step 4:
Secure the mounting-bracket to the wall by inserting the retention screws into
Step 5:
Page 52
Wall mounting
Stand/Arm mounting
PPCxx-CX Series Flat Panel PC