Installation Precautions; Preinstalled Components - Pixelink PPC15-CX Instruction Manual

3.1 Installation Precautions

When installing hardware or upgrades into the PPC, please follow the precautions listed
below:

3.2 Preinstalled Components

The following components are all preinstalled.
Preinstalled OEM customizations may include the following.
Installations of some of the components are described in the following sections.
Page 42
Power turned off: When upgrading the PPC, make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Certified Engineers: Only certified engineers should install and modify
onboard functionalities.
Mounting: The PPC is a heavy device. When mounting the system onto a
rack, panel, wall or arm please make sure that at least two people are
assisting with the procedure.
Anti-static Discharge: If a user open the rear panel of the PPC, to configure
the jumpers or plug in added peripheral devices, ground themselves first and
wear and anti-static wristband.
Motherboard
TFT LCD screen
512MB DDR2 memory module
Resistive type touch screen
Wireless LAN module
Bluetooth module
Power switch
Different DDR2 memory module
Hard disk drive
GPRS module
PPCxx-CX Series Flat Panel PC