PPCxx-CX Series Flat Panel PC
3.9.3 USB Device Connection
There are four external USB 2.0 connectors. All connectors are perpendicular to the PPC
Series. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Located the USB connectors. The locations of the USB connectors are shown
Step 1:
in Chapter 2.
Align the connectors. Align the USB device connector with one of the
Step 2:
connectors on the bottom panel. See Figure 3-17.
Figure 3-17: USB Device Connection
Insert the device connector. Once aligned, gently insert the USB device
Step 3:
connector into the onboard connector.
Step 0:
Page 59