Scanner Address
Scan the bar code below to determine the address of the scanner you are using.
Linked Modes
Locked Link Mode and Open Link Mode are the link modes that accommodate different applications. Scan the appropriate bar
codes included in the Open Link and Locked Link Mode explanations that follow to switch from one mode to another. Default =
Open Link Mode.
Locked Link Mode - Single Scanner
When you scan the bar code below, only the linked scanner can connect to the host and other scanners are blocked from
being linked to that host.
To use a different scanner, you need to unlink the original scanner by scanning the Unlink Scanner bar code. (See
Unlinking the
Scanner, below.)
Open Link Mode - Single Scanner
When in Open Link - Single Scanner Mode, each time a scanner is paired with a host, the scanner becomes linked to the
host and the old scanner is unlinked.
Unlinking the Scanner
If a host has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the host. To unlink the scanner from a host, scan the Unlink Scan-
ner bar code below.
Scanner Address
Locked Link Mode
(Single Scanner)
* Open Link Mode
(Single Scanner)
Unlink Scanner
3 - 7