Programming the VG1602 Corded Interface
You may convert a VG1602 scanner to a corded scanner using a USB interface cable. Use the following bar codes to program
the VG1602g as a corded scanner.
Setting the VG1602 Corded Interface
Scan one of the following codes to set the scanner's communication as either Bluetooth, for a cordless scanner, to USB, for
a corded scanner. Default = Bluetooth Communication (Cordless Scanner).
Note: Once the communication is set to USB (Corded Scanner), the VG1602g can only communicate with the host via a
USB interface cable.
Corded USB PC or Macintosh Keyboard
Scan one of the following codes to program the corded scanner for a USB Keyboard, either PC or Macintosh, then power
cycle the host.
Corded USB HID POS
Scan the following code to program the corded scanner for USB HID POS interface, then power cycle the host.
Corded USB HID POS Interface
Corded USB Keyboard (Mac)
2 - 23