Scan Led Sequences And Meaning; Low Battery Indicator; Reset Scanner; Scanner Report - Honeywell Voyager 1602g User Manual

The table below lists the indication and cause of the LED indicators and beeps for the scanner.

Scan LED Sequences and Meaning

Low Battery Indicator

Battery LED

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the host.

Scanner Report

Scan the bar code below to generate a report for the connected scanners. The report indicates the port, work group, scanner
name, and address. To assign a name to your scanner, refer to
3 - 6
LED Indication
Normal Operation
Red flash
Green flash
Red, blinking
Blue, off
Blue flash
Blue, on
Menu Operation
Green flash
Red, blinking
If your battery is low, the battery LED double flashes orange and the scanner double chirps. The
programmable button can also be set to display the battery charge level. See
Status on page 4-2.
Beeper Indication
None
1 beep
Razz or error tone
None
None
1 beep
2 beeps
Razz or error tone
Reset Scanner
Menu Command
Scanner Report
Cause
Battery low
Successful scan
Failed communication
Bluetooth connection has not been
established
Scanner is attempting to pair with
Bluetooth device
Successful Bluetooth pairing
Successful menu change
Unsuccessful menu change
Battery Charge
Syntax, page 10-1.