Bluetooth Pair/Unpair; Disable Programmable Button - Honeywell Voyager 1602g User Manual

Bluetooth Pair/Unpair

The programmable button can be used to toggle between pairing and unpairing from the host. Scan one of the following
bar codes to set the Bluetooth Pair/Unpair with a short or long press of the programmable button:
Bluetooth Pair/Unpair On -
Short Press
The Bluetooth LED flashes in the following pattern after a short or long press of the programmable button
LED Indicator
Blue, off
Blue flash
Blue, on
Bluetooth LED

Disable Programmable Button

To disable the programmable button, scan one or both of the bar codes below. Default = Disable Short and Long Press.
* Disable Short Press
Beeper Indicator Bluetooth Status
None Bluetooth connection has not been established
None Scanner is attempting to pair with Bluetooth device
1 beep Successful Bluetooth pairing
Bluetooth Pair/Unpair On -
Long Press
* Disable Long Press
4 - 3