Usb Ibm Surepos; Usb Pc Or Macintosh Keyboard - Honeywell Voyager 1602g User Manual

Hide thumbs Also See for Voyager 1602g:
Table of Contents

Advertisement

RS485 Packet Length
If you are using Packet mode, you can specify the size of the data "packet" that is sent to the host. Scan the Packet
Length bar code, then then the packet size (from 20 - 256) from the
manual, then Save. Default = 40.

USB IBM SurePos

Scan one of the following "Plug and Play" codes to program the scanner for an IBM SurePos (USB handheld scanner) or
IBM SurePos (USB tabletop scanner) interface. This interface is only appropriate for an Access Point.
Note: After scanning one of these codes, you must power cycle the cash register.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Each bar code above also programs the following suffixes for each symbology:

USB PC or Macintosh Keyboard

Scan one of the following codes to program the scanner for USB PC Keyboard or USB Macintosh Keyboard, then power
cycle the host. Scanning these codes also adds a CR suffix. This interface is only appropriate for an Access Point.
USB Japanese Keyboard (PC)
2 - 14
Symbology
Suffix
EAN 8
0C
EAN 13
16
UPC A
0D
UPC E
0A
Programming Chart
Packet Length
Symbology
Code 39
Interleaved 2 of 5
Code 128
Code 39
inside the back cover of this
USB IBM SurePos
(USB Tabletop Scanner)
Interface
Suffix
00 0A 0B
00 0D 0B
00 18 0B
00 0A 0B
USB Keyboard (Mac)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents