Host Ack Timeout - Honeywell Voyager 1602g User Manual

Host ACK On/Off
Host ACK On

Host ACK Timeout

You can set a timeout for the length of time the scanner waits for a valid escape command when using Host Acknowledg-
ment Mode. Set the length (in seconds) for a timeout by scanning the following bar code, then setting the timeout (from 1-
90 seconds) by scanning digits from the
Default = 10.
Host ACK Responses
Command
[ESC] a,
[ESC] b,
[ESC] 1,
[ESC] 2,
[ESC] 3,
[ESC] 4,
[ESC] 5,
[ESC] 6,
[ESC] 7,
[ESC] 8,[ESC] 8,
3 - 22
Programming Chart
Host ACK Timeout
Action
Double beeps to indicate a successful menu change was made.
Razz or error tone to indicate a menu change was unsuccessful.
The green LED illuminates for 135 milliseconds followed by a pause.
The green LED illuminates for 2 seconds followed by a pause.
The green LED illuminates for 5 seconds followed by a pause.
Emits a beep at a low pitch.
Emits a beep at a medium pitch.
Emits a beep at a high pitch.
Beeps to indicate a successful decode and communication to host.
Razz or error tone to indicate a decode/communication to host was unsuccessful.
inside the back cover of this manual, then scanning Save.
* Host ACK Off