Pitch
Paging
When you press the Page button on the base, the scanner associated with that base will begin beeping (see
on page 3-3). You can set the pitch of the paging beep for the scanner by scanning one of the following bar codes. Default
= Low.
* Low (1000 Hz)
High (4200 Hz)
Error Indicators
Scanner Address
Scan the following bar code to determine the address of the scanner you are using.
Base Address
Scan the following bar code to determine the address of the base you are using.
Scanner Modes
The Voyager is capable of working with Bluetooth devices other than the CCB00-010BT charge base.
Charge Only Mode
There may be times when you want to charge your scanner, but not link to the base. For example, if a scanner is linked to
a Bluetooth device and you need to charge the scanner, but want to retain your existing link.
Scanner Address
Base Address
Page Button
Medium (3250 Hz)
3 - 7