1.2 Standard Compliance
CE
z
z
RCM
z
z
EN 62040-1
z
z
EN 62040-2 Category C2
z
z
1.3 Storage
Prior to installation
z
z
If the UPS needs to be stored prior to installation, it should be placed in a
dry area. The allowable storage temperature is between -15°C and +50°C
(5°F~122°F).
After usage
z
z
Press the
the utility power, remove all equipment from the UPS, and store the UPS in a dry
and well-ventilated area at a temperature between -15°C and +50°C (5°F~122°F).
Idle batteries must be recharged fully approximately every three months if the
UPS needs to be stored for an extended period of time. The charging time must
not be less than 24 hours each time.
NOTE :
After storage and before start-up of the UPS, you must allow the UPS to
adjust to room temperature (20°C~25°C or 68°F~77°F) for at least one
hour to avoid moisture condensing inside the UPS.
Amplon N Series
button, make sure the UPS is shutdown, disconnect the UPS from
4
Need help?
Do you have a question about the Amplon UPS102N2000B035 and is the answer not in the manual?