Usage Warnings
This is a class-A product. In a domestic environment, this product may cause ra-
z
z
dio interference, in which case, the user is required to take adequate measures.
The UPS can be used to power computers and associated peripheral devices,
z
z
such as monitors, modems, cartridge tape drives, external hard drives, etc.
It is strictly forbidden to connect the UPS with:
z
z
1. any regenerative-type loads.
2. any asymmetrical loads (ex. half-wave rectifier).
To ensure reliable operation of the UPS and to protect the UPS from overheat-
z
z
ing, the slits and openings in the UPS must not be blocked or covered.
Before usage, you must allow the UPS to adjust to room temperature for at least
z
z
one hour to avoid moisture condensing inside the UPS.
Do not pour and splash any liquid on the UPS. Do not insert any object into
z
z
the UPS's slits and openings. Do not put beverage containers on or around the
UPS.
When an emergency occurs, press the OFF button (
z
z
you hear one beep to turn off the UPS. Cut off the input power to completely
shut down the UPS.
Do not use any cleaning liquid or cleaning spray to clean the UPS. Before clean-
z
z
ing, please make sure that the UPS has been completely shut down, the UPS's
input power cord has been unplugged, and the built-in batteries have been dis-
connected.
All maintenance services must be performed by qualified service personnel.
z
z
Forbid opening or removing the cover of the UPS to avoid high voltage electric
shock.
You must contact qualified service personnel if either of the following events oc-
z
z
cur:
1. Liquid is poured or splashed on the UPS.
2. The UPS does not run normally after this User Manual is carefully
observed.
NOTE :
If you use the UPS in an area that generates or incurs dust, you should
install a dust filter in the UPS to ensure normal product life and function.
Amplon N Series
2
) and release it after
Need help?
Do you have a question about the Amplon UPS102N2000B035 and is the answer not in the manual?