Drive Coupling Removal; Flywheel Magneto Removal - Yamaha Waverunner VXS VX1800 Service Manual

Drive coupling removal

Use heat-resistant
burns could result.
1. Heat the holder "1" and drive coupling "2"
for 20–30 minutes using a heat gun "3".
Be careful not to damage the wire harness
when using the heat gun.
3
1
2. Hold the drive coupling "1" using the spe-
cial service tool "2", and then remove the
holder "3" by turning it clockwise.
2
Coupler wrench "2"
90890-06729
Coupler wrench "2"
YW-06729
gloves. Otherwise,
2
2 1
3
1
3. Hold the transfer shaft "1" using the special
service tool "2", and then remove the drive
coupling "3" using the special service tool
"4".
2
Crankshaft holder "2"
90890-06732
Crankshaft holder "2"
YW-06562
Coupler wrench "4"
90890-06729
Coupler wrench "4"
YW-06729

Flywheel magneto removal

Use heat-resistant
burns could result.
1. Remove the generator cover.
2. Heat the transfer shaft "1" for 20–30 min-
utes using a heat gun "2".
2
5-58
Generator cover
2
3
4
4
1
3
gloves.
1
Otherwise,