Yamaha Waverunner VXS VX1800 Service Manual page 246

1
2. Push the lock button "a" or unlock button
"b" to transmit the ID code from the remote
control transmitter to be registered.
TIP:
• At this time, the system enters the registra-
tion mode to register the first code. All exist-
ing ID codes will be deleted from the remote
control receiver.
• The "UNLOCK" indicator light "c" blinks when
the registration of the ID code has been com-
pleted. (If the registration could not be com-
pleted, the "UNLOCK" indicator light comes
on. Re-transmit the ID code.)
3. After checking that the registration of the
ID code has been completed using the
"UNLOCK" indicator light "c", transmit the
next ID code.
TIP:
• Up to 5 remote control transmitters can be
registered in any sequence, regardless of
whether they are original equipment or addi-
tional transmitters.
• The same ID code cannot be registered twice
in the remote control receiver.
a
Gy Gy
B B
a
3
2
a
4. After ID code registration has been com-
pleted, disconnect the entry box to exit the
registration mode.
7-39
Remote control system
b
c