Fuel filler neck nut "4"
6 Nm (0.6 kgf·m, 4.4 ft·lb)
4. Install the fuel filler hose "1", and then tight-
en the clamps "2" to the specified torque.
5. Check that the distance "a" is within speci-
fication.
TIP:
Align the arrow mark "b" on the fuel filler hose
"1" with the projection "c" on the fuel filler neck.
2
1
Distance "a"
30–40 mm (1.2–1.6 in)
Fuel filler hose clamp "2"
3.5 Nm (0.35 kgf·m, 2.58 ft·lb)
6. Connect the fuel sender coupler "a" and
fuel pump module coupler "b".
7. Install the fuel tank breather hoses "1" and
check valve "2".
8. Fasten the fuel tank breather hoses "1" us-
ing new plastic ties "3".
TIP:
Point the arrow mark "c" toward the fuel tank.
a
c
b
2
1
2
Fuel tank and fuel pump module
1
2
3
9. Install the engine unit. See "Engine unit in-
stallation" (5-10).
10. Install the air filter case bracket and air fil-
ter case. See "Air filter case and fuel hose"
(4-1).
4-15
a
c
1
b