Yamaha Waverunner VXS VX1800 Service Manual page 104

Clamp "1"
2.5 Nm (0.25 kgf·m, 1.84 ft·lb)
19. Install the stay "1", and then tighten the
stay bolts "2" and "3" to the specified
torques in 2 stages.
20. Connect the cooling water hoses "4" and
"5", and then fasten them using the clamps
"6" and "7".
2
2
1
Stay bolt "2" and "3"
1st: 23 Nm (2.3 kgf·m, 17.0 ft·lb)
2nd: 42 Nm (4.2 kgf·m, 31.0 ft·lb)
21. Install the rectifier/regulator "1", and then
tighten the rectifier/regulator bolts "2" to
the specified torque.
22. Connect the cooling water hoses "3", "4",
and "5", and then fasten them using the
clamps "6", "7", and "8".
3
1
8
5
2
2
4
Rectifier/regulator bolt "2"
26 Nm (2.6 kgf·m, 19.2 ft·lb)
23. Connect the thermo sensor coupler "a".
24. Fasten the lead using the plastic tie "1".
6 7
4
5
3
3
6
2
7
25. Install the oil filter "1", and then tighten it to
the specified torque.
Oil filter wrench "2"
90890-06830
Oil filter wrench "2"
YB-06830
Oil filter "1"
18 Nm (1.8 kgf·m, 13.3 ft·lb)
26. Connect the RiDE motor couplers "a" and
"b", and then fasten the RiDE motor lead
using the plastic tie "1".
27. Connect the cooling water hose "2", and
then fasten it using the clamp "3".
3
2
28. Connect the cooling water hose "1", and
then fasten it using the clamp "2".
5-13
Engine mount
1
2
1
a
b
a
1