CYBEX Pallas M-FIX User Manual page 45

a
c
44
w
PLACING THE SEAT IN THE VEHICLE
Place the child seat on the appropriate seat in the car.
• Always ensure that the entire surface of the back rest (a) of the CYBEX
PALLAS M-fi x is placed fully against the back rest of the vehicle seat.
The child seat must never be in a lying position. If necessary, you can
adjust the distance using the adjustment lever (c) on the frame (w) of the
CYBEX PALLAS M-fi x child seat.
• If the head rest of the vehicle is in the way, pull it out all the way, turn it away
or remove it completely (for exceptions to this, please refer to the section
"POSITIONING THE SEAT CORRECTLY IN THE VEHICLE") The back rest (a) will
perfectly adapt to practically any incline of the vehicle seat.
WARNING! The full surface of the back rest of the CYBEX child seat must be
against the back rest of the vehicle. To ensure maximum protection for your
child, the seat must be in a normal upright position!
Note! On some car seats made of sensitive materials (e.g. suede, leather etc.), the
use of child seats may leave marks and/or cause discolouration. To prevent this, you
can place a blanket or towel underneath it, for example. Please also refer to in this
connection to our cleaning instructions in these usage instructions; these cleaning
instructions must be observed prior to using the seat for the fi rst time.