Cargo Area Light; Other Bulbs; Replacing Key Battery; Safety Precautions - Subaru Ascent 2023 Manual

516

Replacing key battery

& Cargo area light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
& Other bulbs
It may be difficult to replace the bulbs.
Have the bulbs replaced by your
SUBARU dealer if necessary.
11-23. Replacing key battery
The access key fob/transmitter battery
may be discharged under the following
conditions.
. The operation of the keyless access
function is unstable.
. The operating distance of the remote
keyless entry system is unstable.
. The transmitter does not operate prop-
erly when used within the standard
distance.
Replace the battery with a new one.
& Safety precautions
CAUTION
. Do not let dust, oil or water get on
or in the access key fob/transmit-
ter when replacing the battery.
. Before replacing the battery, re-
move any static electricity.
. Be careful not to touch or damage
the printed circuit board in the
access key fob/transmitter when
replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. There is a danger of an explosion
if the battery is incorrectly re-
placed. Replace only with the
same or equivalent type of the
battery.
. Batteries should not be exposed
to excessive heat such as bright
sunlight, fire or the like.
NOTE
. Replace only with the same or
equivalent type of battery recom-
mended by the manufacturer.
. Dispose of used batteries according
to local laws.
. Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals.
It may result in a malfunction.
. It is recommended that the battery
be replaced by a SUBARU dealer.
. Use a new battery.
. After replacing the battery, confirm
that the transmitter functions prop-
erly.