& BSD/RCTA warning indicator
! System malfunction
1)
BSD/RCTA malfunction message
2)
At first, this message will appear
3)
Then this message will appear
4)
BSD/RCTA warning indicator
This display appears when a malfunction
occurs in the system. Contact a SUBARU
dealer and have the system inspected.
& BSD/RCTA OFF switch
BSD/RCTA OFF switch
BSD/RCTA OFF indicator (type A)
Starting and operating/BSD/RCTA
BSD/RCTA OFF indicator (type B)
If the BSD/RCTA OFF switch is pressed,
the BSD/RCTA OFF indicator appears on
the combination meter, and the BSD/
RCTA is deactivated.
Press the switch again to activate the BSD/
RCTA. The BSD/RCTA OFF indicator will
disappear.
When this occurs, the BSD/RCTA ap-
proach indicator light on the side of the
rearview mirror illuminates for a few
seconds and then turns off.
NOTE
. In the following cases, the system
may not operate properly due to
blocked radar waves. Press the BSD/
RCTA OFF switch to deactivate the
system.
– CONTINUED –
7-67