Table of Contents
Advertisement
5.5.7
Select the remaining four coals and position along the rear edge of the
fuelbed (see fig. 12 below)
Fig. 12
The exact position and fit of the coals may be finely adjusted to give the most
pleasing and random appearance.
Warning : Use only the coals supplied with the fire. When replacing the
coals remove the old coals and discard them. Fit a complete set of
coals of the correct type. Do not fit additional coals or any coals
other than a genuine replacement set.
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
pebbles which may be replaced as described in the above section. Replacement
of any other parts must be carried out by a competent person such as a GAS
SAFE registered gas installer. The part numbers of the user replaceable parts are
asfollows, these are available from your local stockist, whose details may be found
on the BFM Europe website, address as shown on the rear cover.
Fuelbed base (coal models)
Fuelbed base (pebble models)
Fuelbed front rail (pebble models)
Replacement pebble set
Fuelbed front ceramics rails (coal models)
Replacement coal set & ceramics
Important Note : Should the electric mains supply cable require replacing,
this must only be carried out by a BFM service agent or other suitably
qualified person.
45
B-56320
B-77260
B-58140
B-77250
B-56330
B-56960
Advertisement
Table of Contents
