Assembling Fuel Bed And Commissioning - Flavel FVPC**MN Installation, Maintenance & User Instructions

ASSEMBLING FUEL BED AND COMMISSIONING -

NOTE : The position of the fuel-bed components are critical to the
performance of the product. Therefore please ensure that the fuel-bed
components are positioned as described in the following section prior to
requesting a service call due to soot build up, poor flame pattern etc.
3.1.1 Place the ribbed ceramic fuelbed base on top of the fuelbed support
and pull fully forwards to the burner. Make sure that the fuelbed
base is located centrally in the fire box. Ensure that the fuelbed
base fit fully down onto the fuel bed support and is not
lodged on the burner. See fig. 23 below.
Fig. 23
3.1.2 Position front ceramic rail on burner front ceramic support and ensure
that the locating channel in the front ceramic rail is correctly located
onto the lip on the burner front ceramic support. (See fig. 24 below)
Fig. 24
SECTION 3.1
(LINEAR PEBBLE MODELS)
22