Apm Configuration - Asus Motherboard M2S-X User Manual

2.5.4

APM Configuration

Restore on AC Power Loss
Power On By PS2 Keyboard
Power On By PS2 MOUSE
Power On By Internal MAC LAN
Power On By PCI Devices
Power On By External Modems
Power On By RTC Alarm
Restore on AC/Power Loss [Always OFF]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever the system state before the AC power loss. Configuration
options: [Always OFF] [Always On] [Keep Previous State]
Power On By PS2 Keyboard [Disabled]
Allows you to disable or set the keyboard wake-up feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PS2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to resume the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Power On By Internal MAC LAN [Disabled]
Allows you to enable or disable the MAC wake from sleep states.
Configuration options: [Disabled] [Enabled]
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to generate a wake event. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
ASUS M2S-X
[Always OFF]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
2-29