Table of Contents
Advertisement
2.6.1
Boot Device Priority
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appear on the screen depends on
the the number of devices installed in the system. Configuration options:
[1st FLOPPY DRIVE][Hard Drive][ATAPI CD-ROM][Disabled]
2.6.2
Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Full Screen Logo
Bootup Num-Lock
Wait for 'F1' If Error
Hit 'DEL' Message Display
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some Power On Self Tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items. Configuration options:
[Disabled] [Enabled]
Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you wish to use the
ASUS MyLogo™ feature.
2-32
[1st FLOPPY DRIVE]
[Hard Drive]
[ATAPI CD-ROM]
[Enabled]
[Enabled]
[On]
[Enabled]
[Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Chapter 2: BIOS Setup
Advertisement
Table of Contents
