Sata1 And Sata2 - Asus Motherboard M2S-X User Manual

PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.5

SATA1 and SATA2

While entering setup, the BIOS auto detects the presence of IDE devices.
There is a separate sub-menu for each IDE device. Select a device item
then press <Enter> to display the IDE device information.
Third IDE Master
Device : Not Detected
LBA/Large Mode
Block(Multi-sector Transfer) M
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
2-14
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Chapter 2: BIOS Setup