Apm Configuration; Tls Auth Configuration - Asus Z13PE-D16 Manual

Self Test Action [Controller Only Test]
This item allows you to select either to test Controller alone or Controller and
NameSpace. Selecting Controller and Namespace option will take a lot longer to
complete the test.
Configuration options: [Controller Only Test] [Controller and NameSpace Test]
Run Device Self Test
Press <Enter> to perform device self test for the corresponding Option and Action
selected by the user. Pressing the <ESC> key will abort the test. The results shown
below is the most recent result logged in the device.
4.5.12

APM Configuration

This page will allow you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Configuration options: [Power On] [Power Off] [Last State]
Power On By PCI-E [Disabled]
Allows you to enable or disable the wake-on-LAN function of the onboard LAN controller or
other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set values.
4.5.13

Tls Auth Configuration

The items in this menu allows you to set the authentication mode.
Server CA Configuration
This option allows you to configure the server's CA. This allows you to both enroll the
required certificate files and also to delete the certicates that are not required.
ASUS Z13PE-D16
4-19