Onboard Devices Configuration; Apm Configuration - Asus PRIME X570-P Manual

Hot Plug
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
3.6.5

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
PCIEX16_1 Bandwidth
This item displays varies based on the CPU installed.
[X8 Mode]
[PCIe RAID Mode] The Hyper M.2 x16 card and other add-on M.2 devices all run at x4
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot up.
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state. Configuration options: [All On] [Stealth Mode] [Aura Only] [Aura Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states. Configuration options: [All On] [Stealth Mode] [Aura
Only] [Aura Off]
Realtek LAN Controller
Enables or disables the Realtek LAN controllers. Configuration options: [On] [Off]
Realtek PXE OPROM
Enables or disables the Realtek PXE OPROM. Configuration options: [On] [Off]
USB power delivery in Soft Off state (S5)
This item allows you to chagre USB devices even when the system is at Power State S5.
Configuration options: [Disabled] [Enabled]
3.6.6

APM Configuration

The items in this menu allow you to set system wake and sleep settings.
3-14
The PCIe x16_1 slot runs at x8 mode.
mode, which allows you to create a PCIe RAID array.
Chapter 3: BIOS Setup