Adjusting Of The Tip Cap; Maintenance; Regular Maintenance - Vermeiren Inovys II Instruction Manual

3.10 Adjusting of the tip cap

WARNING:
Risk of injury - Make sure that the spring button c c c c is locked after
   
adjusting the tip cap.
A tip cap is mounted on the lower back frame that can be adjusted in its height depending on
the seat height of the wheelchair.
The tip cap can be placed in 3 different positions with a difference of 20 mm.
4

Maintenance

Lifetime of the wheelchair is influenced by its use, storage, regular maintenance, servicing
and cleaning.
4.1

Regular Maintenance

The maintenance activities to ensure a good condition for your Vermeiren wheelchair are
described below:
Before every ride
•
Check the tyres and make them clean. If necessary change the tire.
ƒ
Check screw fastenings, levers, adjusting buttons are secured.
ƒ
Check the brakes and adjusted if necessary.
ƒ
Check the wheelchair (cleanliness, cracks, damage on structural parts ... .)
ƒ
and make it clean. If necessary change the coating.
Every 8 weeks: inspected and lubricating or adjusting from
•
Arm supports
ƒ
Footrests
ƒ
Brake lever
ƒ
Wheel axles
ƒ
Adjusting systems
ƒ
Every 6 months or for every new user
•
General review
ƒ
Disinfection
ƒ
Frontwheels, possibly clean bearings
ƒ
For your convenience, on the back of this manual is a maintenance plan.
Repairing and assembling of spare parts for your wheelchair may only be performed by the
specialist dealer.
Only authorized Vermeiren spare parts may be installed.
1. Press the spring button
2. Press the tip cap tube into the frame
tube or out the frame tube until the
desired position is reached.
3. Loosen the spring button
4. Check that the spring button
securely fixated.
ƒ‰‡
Inovys II
2011-11
.
.
is