To support you on the installation and repairs of this wheelchair, this installation manual is offered. Please read it carefully. If you still have questions after reading this manual, do not hesitate to contact Vermeiren. The information in this manual applies to following wheelchair(s): ...
Inovys wheelchairs 2019-02 Scope of delivery Scope of delivery The following items are part of the delivery. Frame including wheels, backrest frame, seat and positioning mechanisms (mechanical or electric *). Backrest and 2 leg rests 2 Armrests Headrest * ...
in rear adjustment position, the wheelchair becomes more stable, but less manoeuvrable; in front adjustment position, it becomes less stable but more manoeuvrable. Important remarks For more information, contact Vermeiren. To increase stability and manoeuvrability, the following adjustments can be made: ...
Inovys wheelchairs 2019-02 Adjustments Rear-wheel position Risk of injuries or damage CAUTION After adjustment of the rear wheels, check the working of the brakes and adjust according to §3.5. For each type of driving wheel (16”, 22” and 24”), two adjustment positions are available: ...
Inovys wheelchairs 2019-02 Adjustments Seat height and seat angle The seat height of the Inovys wheelchair is adjustable in 3 positions in steps of 35 mm. To adjust the seat height, the following connection points (located below the seat frame) need to be repositioned: ...
Inovys wheelchairs 2019-02 Adjustments Seat depth The seat depth can be changed by adjusting the seat frame position (3 positions available: 480 – 500 – 520 mm) by adjusting the backrest depth, see §3.4. With the backrest- depth adjustment, a minimum seat depth of 460 mm is possible.
Inovys wheelchairs 2019-02 Adjustments Adjust the backrest depth at the toothed clamps (19) of the brackets: 1. Remove the backrest. 2. Loosen the socket screw (18) of the toothed clamp (19). 3. Move the bracket forward/backward, but make sure that all teeth of the clamp stay covered.
Inovys wheelchairs 2019-02 Adjustments To adjust the length of the footrests: 1. Remove the socket screw (24) on the back of the footrest. 2. Adjust the footrest to a comfortable length. 3. Retighten the socket screw firmly. 4. Repeat for the second footrest. Make sure that the footrests are positioned identically.
Inovys wheelchairs 2019-02 Adjustments Calfrest height The calfrests are available in different sizes: small size for wheelchair with seat width 400 mm; medium size for wheelchair with seat width 450 mm or 500 mm. 1. Turn the calfrest outwards. 2.
CAUTION If replacement of the batteries is necessary , the complete battery pack needs to be exchanged (IP66). Contact Vermeiren for more information. Never try to open the battery pack. Read and apply the instructions of the battery pack and charger to remove, install and charge the battery.