Vermeiren Inovys II Instruction Manual page 24

Adjusting the depth:
1. Loosen bolt on plate
c
2. Adjust the depth of the leg support to a comfortable position (7 different positions in
steps of 15 mm).
3. Retighten the bolt
c
Adjusting the width:
3.8.3 Adjusting angle foot plate
Adjust the angle of the footplate as follow:
1. Loosen bolt .
c
2. Adjust tube d in the desired angle. The angle indication (80° -85 ° -90° -95° -100° ) is
according the dashes e.
3. Retighten the bolt
.
.
1. Loosen the two bolts
2. Adjust the width of the leg support to a comfortable position
(2 different positions in steps of 20 mm, do not use the
middle hole d d d d for adjusting).
3. Retighten the two bolts
.
c
ƒ‰‡
on the back of leg support cushion.
c
.
c
100°
80°
Inovys II
2011-11