Connecting Console - Digisol DG-GS4526P Installation Manual

Caution!
The brackets are used to fix the switch on the rack. They can't serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.

2.3.2 Connecting Console

DG-GS4526Pseries provide a serial RJ45 console port.
The connection procedure is listed below:
1. Find the console cable provided in the accessory kit. Attach the RJ45 end to console
port of the switch.
Fig 2-2 Fasten the Switch to the Rack
Fig 2-3 Connecting Console to DG-GS4526P
15
DG-GS4526P Installation Guide