Table of Contents
Advertisement
2. Put the bracket-mounted switch smoothly into a standard 19'' rack. Fasten the
DG-CS4616F to the rack with the screws provided. Leave enough space around the
switch for good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can't serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.
2.3.2 Connecting Console
DG-CS4616F provide a serial RJ45 console port.
Fig 2- 2 Fasten the Switch to the Rack
Chapter 2-7
DG-CS4616F Installation Guide
Advertisement
Table of Contents
