Table of Contents
Advertisement
Power Connection
Plug the circle end of the power adapter firmly into the power port on the rear
side, and the other end into an electrical service outlet, then the device is
ready to use.
Connecting Computers to the Switch
The switch features auto MDI/MDIX cross over detection function and
provides plug-and-play capability. Users can immediately use any of the
features of this product simply by plugging the network cables (RJ-45) into
the computers and the switch.
Uplink
All Ports can be used as an uplink port for connecting to another unit without
using crossover cable. When using the uplink port, you can extend the
distance to 100m for linking another switch or hub.
To prolong the operational life of your units
Do not place objects on top of any unit or stack.
Do not obstruct any vents at the sides of the case.
Advertisement
Table of Contents
