Table of Contents
Advertisement
24.1 Example
No. Settings
24.1.1
Outgoing
24.1.2
Outgoing
24.1.3
Outgoing
24.1.4
Incoming
24.1.5 WAN to DMZ Creating a Policy to Limit the Bandwidth, Daily Total
24.1.6 WAN to DMZ
DMZ to WAN
LAN to DMZ
Prerequisite Setup
Configure Port1 as LAN1 (192.168.1.1, NAT/ Routing mode) and connect it to the
LAN which is using 192.168.1.x/24.
Configure Port2 as WAN1 (61.11.11.11) and connect it to the ADSL Termination Unit
Remote (ATUR) to access the Internet.
Configure Port3 as WAN2 (211.22.22.22) and connect it to the ADSL Termination
Unit Remote (ATUR) to access the Internet.
Configure Port4 as DMZ1.
Scenario
Creating a Policy to Monitor the Internet Access of
LAN User
Creating a Policy to Restrict the Access to Specific
Web Sites
Creating a Policy to Grant Internet Access to Only
Authenticated Users on Schedule
Creating a Policy to Enable a Remote User to Control
a LAN PC with Remote Control Software
(pcAnywhere)
Traffic Amount and Maximum Concurrent Sessions
of an Incoming Session to a FTP Server (A NAT
Mode Example)
Creating a Policy to Enable LAN / WAN Users to
Have Email Access (A Transparent Mode Example)
666
Page
667
673
680
682
684
687
Advertisement
Table of Contents
