Ddns - Planet CS-2001 User Manual

2.6 DDNS

Step 1. Go to System > Configuration > Dynamic DNS, and set as below:
2-31）

Click New Entry. Select a Service Provider from the drop-down list.

Tick Use the IP of on the right of WAN IP and then select a WAN
port.

Type the Username, Password and Hostname accordingly.

Click OK.
Note:
1. The meaning of the symbols used in DDNS are as follows:
Symbol
Meaning
2. If you do not have a DDNS account, you may first select a desirable service provider from the
pull-down menu and then click Sign up next to it to register an account.
3. You may configure the WAN IP by either ticking the Automatically checkbox or simply
specifying it in the WAN IP field.
（Figure 2-32）
Figure 2-31 Configuring the Dynamic DNS Settings
Figure 2-32 Configuring the Dynamic DNS Settings
Successful
Connection Connection
Failed Connected
64
（Figure