Ping - Planet CS-2001 User Manual

32.1 Ping

Step 1. To test whether a host is reachable across an IP network, go to Monitoring
> Diagnostic Tools > Ping and then configure as below:

Type the Destination IP or Domain name in the Destination IP /
Domain name field.

In Packet size configure the size of each packet. (32 Bytes by default)

In Count, configure the quantity of packets to send out. (4 by default)

In Wait time, specify the duration to wait between successive pings. (1
second by default)

Select the interface from the Interface drop-down list.

Click OK.
（Figure 30-2）
Figure 30-1 Ping Settings
817
（Figure 30-1）