32.3 Packet Capture
Capture packetfor debugging
Step 1. Under Monitoring > Diagnostic Tools> Packet Capture the packet
capture can help to debug and capture the packet content for debugging.
( figure 30-6 )
In interface drop list selects which one of interface is going to capture the
packet.
In capture time list, choose hong long will be the captured time.
Filll in the Host IP and Netmask you would like to filter.
Configure the filtering rule
Click Start then wait for the captured period, the result will display on the
filed.
CS-2001 UTM Content Security Gateway User's Manual
Figure 30-6 Packet Caputre Results
822