Table of Contents
Advertisement
Step10.
Go to Policy Object > VPN > IPSec Autokey and then click the New
Entry button again.
Step11.
Type VPN_02 in the Name field and then select Port2(WAN1) for the
Interface.
Figure 11-206 Configuring the Name and the Interface
Step12.
Under the Remote Settings section, select Remote Gateway (Static
IP or Hostname) and then fill the field.
Figure 11-207 Configuring the Remote Gateway –Fixed IP or Domain Name
Step13.
Select Pre-Shared Key for Authentication Method and then enter the
Pre-Shared Key String.
Figure 11-208 Configuring the Authentication Method
Step14.
Under the ISAKMP Algorithm section, select 3DES for Encryption
Algorithm, select MD5 for Authentication Algorithm and then select DH
Figure 11-204 First Trunk Completed
（Figure 11-205）
Figure 11-205 The IPSec Autokey Page
（Figure 11-206）
（Figure 11-208）
（Figure 11-207）
350
Advertisement
Table of Contents
