Symbols - AND UA-704 Instruction Manual

Symbols

Standby and Turn the device on.
Battery installation guide
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
Appears while measurement is in
progress. It blinks when the pulse is
detected.
IHB/AFib symbol
Appears when an irregular heartbeat is
detected.
It may light when a very slight vibration
like shivering or shaking is detected.
Blinks when there is air remaining in the
cuff at power up.
Blinks at the completion of the
measurement until exhaust is complete.
Blinks when the pressure is not enough
for the measurement.
FULL BATTERY
The battery power indicator during
measurement.
LOW BATTERY
The battery is low when it blinks.
Unstable blood pressure due to
movement during measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not applied correctly.
The pulse is not detected correctly.
EC directive medical device label
EU-representative
Manufacturer
Date of manufacture
WEEE label
Refer to instruction manual/booklet
Serial number
SN
International protection symbol
IP
Keep dry
Symbols
Function / Meaning
English 5
Recommended Action
Measurement is in
progress. Remain as still
as possible.
Press the exhaust valve
button to exhaust air from
the cuff.
Pump air into the cuff with
the rubber bulb.
Replace the battery with
a new one, when the
indicator blinks.
Try the measuring again.
Remain very still during
measurement.
Apply the cuff correctly,
and try the measurement
again.