Installing/Removing An Ipad Mini Into The E335 - VeriFone e335 Installation Manual

Installing/
Removing an
iPad mini into
the e335
To install an iPad mini
into the e335
' ,
*
The e335 cannot be used as a standalone device. To be able to scan barcodes
and process credit card payments, you need to attach an iPad mini to the e335.
To attach the tablet, the top part of the e335 casing should be removed.
1
Loosen the retaining screw at the back of the e335. The restraining screw is
captive, which means that it cannot be fully removed from the slot.
2
Slide the release button downward to disengage the casing from the main unit.
3
Insert the iPad mini into the casing.
You can now proceed to install the iPad mini.
4
Hold and secure the e335 with the PIN pad facing down.
5
Align the port at the bottom of the iPad mini with the Lightning connector on
the iPad mini then, gently but firmly push the e335 down until it sits firmly.
6
Tighten the screw at the back of the e335 to secure the device.
A
B
Figure 5 Installing an iPad mini into the e335
C D

Installing/Removing an iPad mini into the e335

' ,
*
335 I
E NSTALLATION
D S
EVICE ETUP
E
15
G
UIDE