Using The Magnetic Stripe Reader; Using The Ctls Reader - VeriFone e335 Installation Manual

Using the
Magnetic Stripe
Reader
To conduct a credit/
debit card transaction
NOTE
Using the CTLS
Reader
Use the magnetic stripe reader to perform credit and debit card transactions.
1
Position the card with the magnetic stripe facing the same direction as the
front panel.
2
To ensure a proper read of the magnetic swipe card, insert the magnetic card
from the top of the device, as shown in
Figure 13 Using Magnetic Stripe Card
3
Swipe the card through the magnetic card reader.
You will need a valid SIM card to conduct transactions. For more information on
installing/replacing a SIM card, refer to the appropriate Apple documentation or
visit the Apple Web site.
The e335 supports contactless credit or debit card transactions.
To perform a contactless transaction, gently tap the card or hold the card against
the surface of the contactless antenna, located above the keypad and LCD with a
CTLS symbol.
Figure 14

Using the CTLS reader

Figure
* ' ,
* ' ,

Using the Magnetic Stripe Reader

13.
335 I
E NSTALLATION
D S
EVICE ETUP
21
G
UIDE