Understanding Led Color Behavior; Using A Smart Card To Conduct Transactions - VeriFone e335 Installation Manual

D S
EVICE ETUP

Understanding LED Color Behavior

Understanding
LED Color
Behavior
Deep Battery
Sleep Low
Y
Y
Using a Smart
Card to Conduct
Transactions
To conduct a smart
card transaction
NOTE
20
335 I
E NSTALLATION
The following table shows the behavior of the LEDs during various system power
states.
Charging
Battery
Timer Fault /
Charging
Battery Fault
Y
Y
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position the smart card with the contacts facing in the same direction as the
keypad.
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
Figure 12 Inserting a Smart Card
3
Wait for the application to indicate a completed transaction before removing
the card. Premature card removal invalidates the transaction.
You will need a valid SIM card to conduct transactions. For more information on
installing/replacing a SIM card, refer to the appropriate Apple documentation or
visit the Apple Web site.
G
UIDE
Normal
Operation
All LEDs are turned off
Red, 4Hz rate, 50% duty cycle
Battery low condition: battery voltage <3.65V
Orange, 1Hz rate, 50% duty cycle
Orange on continuously
Y Green on continuously
' ,
*
System LED Behavior