Configuration; Overall Initial Configuration - Lindy SC5 User Manual

Configuration

Almost all configuration and operational aspects of the SC5 units are controlled
on-screen menu
via displays.

Overall initial configuration

When setting up a new installation, the following stages are recommended:
1 Enable the general 'Security'
With security disabled (default setting), a local or remote user attached to
the SC5 will have full and unrestricted access to all computers and all SC5
settings. In larger installations, you are strongly recommended to enable
security and set up individual user accounts with access privileges.
2 Create an ADMIN (administration)
All SC5 units have a fixed user account that cannot be deleted or renamed,
called ADMIN. This user account is the only one that is able to make
important system changes. If you intend to use security, then it is important
to allocate a password to the ADMIN account.
3 Create user accounts and allocate access
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
4 Provide names for computers.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
5 Configure the required 'Setup
Use the ADMIN account to determine key SC5 settings and timing
characteristics.
option.
password.
rights.
Options' and 'Global Preferences'