Poweredusb Interface Cable; Ethernet Interface Cable - Star Micronics FVP-10U Hardware Manual

3-1-4. PoweredUSB Interface Cable
To protect the printer from electromagnetic interference, affix the ferrite core that came with the optional PoweredUSB in-
terface board to the cable. Then, connect the cable to a PoweredUSB port on your PC.
Note:
The optional PoweredUSB cable has been designed specifically for this printer.
Other PoweredUSB cables may not meet the EMC technical standards.
Option: PoweredUSB cable 1X8LNL 1.2M (P/N: 30729130)
Star-recommended PCI card: PCI to 4 Port PoweredUSB Card (Model: 301-1150-01; manufacturer: Digi)
3.5 cm
(maximum)
Pull and cut
3-1-5. Ethernet Interface Cable
To protect the printer from electromagnetic interference, affix the ferrite core that came with the optional Ethernet in-
terface board to the cable. Then, connect the cable to an Ethernet port on your PC.
3.5 cm
(maximum)
Pull and cut
-  -