Ide Configuration - Asus Motherboard NCLV-D2 Series Product Manual

4.3.4 4.3.4 4.3.4

IDE Configuration

IDE Configuration IDE Configuration
4.3.4 4.3.4 IDE Configuration IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you wish to configure the item.
Main
IDE Configuration
Onboard IDE Operate Mode
Enhanced Mode Support On
Configure S-ATA as RAID
IDE Detect Time Out (Sec)
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode]
Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the installed
operating system (OS). Set to [Enhanced Mode] if you are using native OS,
e.g. Windows
OS, e.g. Windows ME/98/NT, MS-DOS.
Configuration options: [Compatible Mode] [Enhanced Mode]
The items E n h a n c e d M o d e S u p p o r t O n
a s R A I D a s R A I D a s R A I D appear only when you set the Onboard IDE Operate Mode to
a s R A I D a s R A I D
[Enhanced Mode].
Enhanced Mode Support On [S-ATA]
Allows you to set Serial ATA, Parallel ATA, or both, to native mode.
Configuration options: [P-ATA+S-ATA] [S-ATA] [ P-ATA]
C o n f i g u r e S - A T A a s R A I D [ N o ] C o n f i g u r e S - A T A a s R A I D [ N o ] C o n f i g u r e S - A T A a s R A I D [ N o ] C o n f i g u r e S - A T A a s R A I D [ N o ] C o n f i g u r e S - A T A a s R A I D [ N o ]
Allows you to configure the Serial ATA devices as RAID sets.
Configuration options: [No] [Yes]
IDE Detect Time Out (Sec) [35] IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35] IDE Detect Time Out (Sec) [35] IDE Detect Time Out (Sec) [35]
Selects the time our value (in seconds) for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
4 - 1 4 4 - 1 4
4 - 1 4 4 - 1 4 4 - 1 4
BIOS SETUP UTILITY
[Enhanced Mode]
[S-ATA]
[No]
[35]
® 2000/XP. Set to [Compatible Mode] if you are using legacy
E n h a n c e d M o d e S u p p o r t O n E n h a n c e d M o d e S u p p o r t O n
E n h a n c e d M o d e S u p p o r t O n and C o n f i g u r e S - A T A E n h a n c e d M o d e S u p p o r t O n
Set [Compatible Mode]
when Legacy OS (i.e.
WIN ME, 98, NT4.0, MS
DOS) is used.
Set [enhanced Mode]
when native OS (i.e.
WIN2000, WIN XP) is
used.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
C o n f i g u r e S - A T A C o n f i g u r e S - A T A
C o n f i g u r e S - A T A C o n f i g u r e S - A T A
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p