Ide Configuration - Asus KFSN5-D Manual

4.3.4

IDE Configuration

The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Main
IDE Configuration
OnBoard IDE Controller
Serial-ATA Devices
nVidia RAID Setup
Primary IDE Master
Primary IDE Slave
Serial-ATA 0 Primary Channel
Serial-ATA 0 Secondary Channel : [Not Detected]
Serial-ATA 1 Primary Channel
Serial-ATA 1 Secondary Channel : [Not Detected]
Serial-ATA 2 Primary Channel
Serial-ATA 2 Secondary Channel : [Not Detected]
IDE Detect Time Out (Sec)
OnBoard IDE Controller [Enabled]
Enables or disables the primary IDE controllers.
Configuration options: [Disabled] [Enabled]
Serial-ATA Devices [Device 0/1/2]
You can disable the Serial ATA devices or select the Serial ATA device you need.
Configuration options: [Disabled] [Device 0] [Device 0/1] [Device 0/1/2]
nVidia RAID Setup
Main
RAID Setup
nVidia RAID Function
nVidia RAID Function [Disabled]
Enables or disables the NVIDIA
Configuration options: [Disabled] [Enabled]
The following items appear when nVidia RAID Function is set to [Enabled].
SATA 0/1/2 Primary/Secondary Channel [Disabled]
Sets the SATA 0/1/2 Primary/Secondary channel as RAID.
Configuration options: [Disabled] [Enabled]
4-10
[Enabled]
[Device 0/1/2]
[35]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
[Disabled]
BIOS SETUP UTILITY
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
BIOS SETUP UTILITY
RAID option ROM.
®
DISABLED: disables the
integrated IDE
Controller.
ENABLED: enables the
Primary IDE
Controllers.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Options
Disabled
Enabled
Chapter 4: BIOS setup